United Kingdom

KSC-PSW7EQ
  • KSC-PSW7EQ
  • KSC-PSW7EQ
  • KSC-PSW7EQ

Additional Images

KSC-PSW7EQ

Powered Enclosure Subwoofer with Active EQ Technology

The compact die-cast enclosure allows installation almost anywhere, including tight spaces such as under a seat or panel. Features the built-in high efficiency class-D amplifier, 200 x 130mm aluminum diaphragm with micro-step shape reinforcement. This micro-step suppresses the unwanted movement of the diaphragm and reproduces accurate and powerful bass sound. The newly developed ACTIVE EQ TECHNOLOGY with three types of bass curves, to match the music of various genres, delivers super-live sound experience . With the wired remote you have full control of the powered subwoofer.

Find your nearest Approved Kenwood Centre
Where to Buy

  • Class D Amplifier
  • Low-pass Filter
  • Amplifier Included
  • Speaker level Input

Key Features

160W Maximum output power for deep and intense bass sound.
ACTIVE EQ TECHNOLOGY with three types of bass to match the music of various genres.
200 x 130mm Aluminum woofer cone with micro-step shape diaphragm surrounding.
High efficiency class-D amplifier for rich and clean bass sound.
Wired remote with Power indicator, Active EQ switch, Volume & Frequency contr. & phase switch.
Line-in & speaker level input with signal sensing turn-on.
Compact aluminum die-cast enclosure (280 x 70 x 220mm).
Connection cables and Installation brackets included.

Speaker Features

Speaker SystemActive subwoofer system
Maximum Output Power160 W
Speaker Size200 x 130mm
Wired remote includedYes
Amplifier IncludedBuilt-in
Enclosure typeAluminum die-cast
Enclosure size (BxHxD)350 x 75 x 240 mm
Enclosure net weight2.6 kg

Amplifier Features

Class D AmplifierYes
Maximum power output160W
Low-pass FilterYes
Phase inverter 0°(Normal) / 180°(Reverse)Yes
Built-in EqualizerYes
Power IndicatorYes
Signal Sensing Turn-onYes
Line inRCA
Speaker level InputYes
ChassisAluminum Die-cast
Yes
Wired Remote SupportPower indicator / Volume / Active EQ / Frequency / Phase

Speaker/woofer Specifications

Woofer Cone materialAluminum
Woofer cone dimensions200 x 130mm
Speaker SurroundHigh-roll urethane
Sensitivity89dB/W/m
Frequency Response40Hz ~ 200Hz
Speaker Impedance1Ω

Amplifier-Specifications

Maximum power output (4Ω)160W x 1
Low-pass Filter50Hz ~125Hz (-18dB)
Line-in Sensitivity20 mV
Speaker Input Sensitivity400 mV
Line-in Impedance22 kΩ
Speaker Input Impedance10 kΩ
Signal to Noise Ratio90dB
Frequency response (+0dB, -3dB)35Hz ~ 150Hz
Operating voltage14.4V (11V ~ 16V allowable)
Maximum current consumption5.9A

Accessories

BracketType1 x 1, type2 x1
Remote controlWired remote (5.0m)
10-pin connector cord (5.0m)
Speaker cord: (4.3m)
Double side adhesive tape for remote control
Screws (Parker-type)Ø 5 x 12mm, 2 pieces
Screws (Parker-type)Ø 3 x 10mm, 2 pieces
Screws (Parker-type)Ø 5 x 16mm, 2 pieces