KFC-XS1704
XS-series, Hi-Res Audio Certified, 17cm Component Speaker
XS-series ultra-high grade speaker that deliver high density realistic sound and a spatial sound impression. The new 17cm component speaker KFC-XS1704 are precisely designed for High-Resolution Audio by using High Rigid Glass Fiber Diaphragm, Magnietic Circuit with Aluminum Ring and Phase Correcting Diffuser. High-Res Sound is Refined Further with 2-Way Tweeter.This unique 2-way tweeter creates a wide range of sound as each of the 2 tweeters reproduces a different frequency band delivering clarity and fullness.
Find your nearest Approved Kenwood Centre
Where to Buy
Key Features
17cm 2-way, 4-speaker system |
45W Rated input power (RMS) |
Golden glass fiber & non-woven woofer cone |
Special phase plug with center dip design |
AFC and Tornado spider damper. |
Optimized magnetic circuit with aluminum short ring |
Unique 2-way tweeter with swivel application |
Outer (hard) and inner (soft) tweeter diaphragm |
High-res audio compatible |
Attached crossover network |
Speaker Features
Speaker System | 2-way component |
Speaker Type | Component |
High-Resolution Audio certified | Yes |
Peak Input Power | 180W |
Rated Input Power | 45W |
Speaker Size | 170mm |
Speaker Cone Design | Carbon-Glass Fiber Cone |
Magnet Type | Ferrit |
Terminals | Slide types |
Silver plated Terminals | Yes |
Swifel Capability | Yes |
Speaker/woofer Specifications
Peak Input Power | 180W |
Rated Input Power | 45W |
Woofer Cone material | Glass Fiber Cone |
Woofer cone dimensions | 156mm ø |
Center Cap Type | Optimized Phase Plug |
Speaker Basket | Aluminum Die-Cast |
Speaker Surround | Rubber |
Spider Type | AFC, Tornado shape |
Sensitivity | 83dB/W/m |
Frequency Response | 34Hz ~ 56000Hz |
Speaker Impedance | 4Ω |
Dimensions (W x H x D) | 156 x 156 x 65.8mm |
Mounting Depth | 57mm |
Mouting Hole Diameter Ø | 142mm |
Speaker Weight | 810gr |
Tweeter Specifications
Dimensions | 51.7 x 42.6 x 67.5mm |
Cone Material | Titanium Hard Dome + Soft dome |
Magnet Type | Neodymium |
Speaker Weight | 80gr |
Accessories
Bracket for Mitubischi | |
Connection cable for Nissan | |
Conection cable for Toyota & Mitsubishi | |
Connection tap (4 pcs) | |
Speaker cable (2pcs) | |
Tweeter Spacer (2 pcs) | |
Tweeter bracket (2 pcs) | |
Screws (Parker-type) | Ø 4 x 16mm, 8 pieces |
Screws (Parker-type) | Ø 5 x 20mm, 8 pieces |
Screws (Parker-type) | Ø 6 x 20mm, 8 pieces |
Screws (Parker-type) | Ø 3 x 12mm, 4 pieces |
Screws (M-type) | M5 x 16mm, 8 pieces |
Speed nut | φ 3, 4 pieces |
Installation brackets | 2 pieces |
Buttyl rubber | Yes |
General Specifications
Weight | 2700 gr. |