Key Features
| 1000W Maximum power | 
| Built-in variable low-pass filter | 
| Buitl-in vriable high-pass filter | 
| 2 ohms load capability | 
| Dual power supply | 
| Power MOS-FET switching power supply | 
Amplifier Features
| Class D Amplifier | Yes | 
| Full Range Digital Amplifier | Yes | 
| Load Capability | 2Ω Stable | 
| Maximum power output | 1000W | 
| Rated power output (4Ω) | 75W x 4 (4Ω) | 
| Rated power output | 100W x 4 (2Ω) | 
| Bridged power output (4Ω) | 200W x 2 | 
| CEA-2006 Compliant | Yes | 
| Low-pass Filter | Yes | 
| High-pass Fliter | Yes | 
| Dual Mono Drive Capability | Yes | 
| Switched Mode Power supply | Yes, with Power MOS-FET | 
| Power Indicator | Yes | 
| Protection function | Yes | 
| Line in | 2 RCA (Gold Plated) A/B | 
| Input Selector | A/AB | 
| Single Side Terminals | Yes | 
| Full Contact Terminal | Yes | 
| Gold Plated Power & Speaker Terminals | Yes | 
| Chassis | Aluminum Die-cast | 
Amplifier-Specifications
| Maximum power output (4Ω) | 250W x 4 | 
| Rated power output (4Ω, 14,4V) | 75W x 4 (20Hz ~ 20000Hz, 1%THD) | 
| Rated power output (2Ω, 14,4V) | 100W x 4 (1000Hz, 1%THD) | 
| Rated power output (4Ω, 14,4V) | 200W x 2 (1000Hz, 1%THD) | 
| Rated power output (CEA-2006) | 75Watts RMS x 4 at 4 ohms and 1% THD | 
| Low-pass Filter | 50~200Hz & 2,5~10kHz (-12dB/oct) | 
| High-pass Fliter | 50~200Hz & 2,5~10kHz (-12dB/oct) | 
| RCA Input Sensitivity | 0.2 ~ 5V | 
| Input Impedance | 10kΩ | 
| Signal to Noise Ratio | 100dB | 
| Signal to noise ratio (CEA-2006) | 76dBa (Reference: 1 Watt into 4 Ohms) | 
| Frequency response (+0dB, -3dB) | 20Hz ~ 20000Hz | 
| Operating voltage | 14.4V (11V ~ 16V allowable) | 
| Maximum current consumption | 37A | 
| Dimensions (WxHxD) | 220 x 35 x 169(mm), | 
| Weight | 1.5kg | 




 
							